DA14585/DA14586 Getting Started Guide Basic Development Kit

UM-B-048

Contents

• 1. Abstract
• 2. Prerequisites
• 3. Introduction
  • 3.1. Kit Content
• 4. The DA14585/586 Hardware
  • 4.1. The Basic Kit board
  • 4.2. Configuring the Basic Kit Board by Jumper Settings
  • 4.3. Board Layout
  • 4.4. Connecting the Basic Kit to the host PC
• 5. The DA14585/586 Hardware
  • 5.1. The ProDev Kit Motherboard
  • 5.2. Configuring the Pro Kit Board by Jumper Settings
  • 5.3. Board Layout
  • 5.4. Connecting the ProDev Kit to the host PC
• 6. DA14585/586 Software Installation
  • 6.1. Requirements of the Development PC
  • 6.2. Driver Installation
  • 6.3. Configuring the Serial Port for UART
  • 6.4. Troubleshooting
• 7. Software Development Tools
  • 7.1. SmartSnippets™ Installation
  • 7.2. KEIL Installation
• 8. Build a DA14585/586 Application
  • 8.1. The Blinky Peripheral Example Application
  • 8.2. The Barebone BLE Example Application
  • 8.3. Troubleshooting
  • 8.4. What Next ?
• 9. Appendices
  • 9.2. Appendix A: Using the Basic Development Kit
  • 9.3. Appendix B: Latency Timer of the FTDI cable
• 10. Terms and Definitions
• 11. Revision history