DA1453x/DA1458x CodeLess User Manual

UM-B-140

:class: hint

In this document:

• DA1453x is referring to DA14531-00, DA14531-01, DA14530 and DA14535.

• DA1458x is referring to DA14585 and DA14586.

• DA145xx is referring to DA1453x and DA1458x.

Warning

• The DA14531-00 is the main DA14531 device, It is not a new device. The -00 is just a new naming to introduce the new variant DA14531-01.

• The DA14531-01 is an additional variant, and NOT a replacement of the DA14531-00.

• The DA14535 is a DA14531 upgrade.

Note

The DA14531-01 is a ROM variant of the main DA14531-00.

The DA14531-01 only supports peripheral mode and some functions have been moved to ROM so more memory is available for the application. In this guide, DA14531 is referring to DA14531-00 and DA14531-01. (see SDK modules in ROM space for details):

Contents

• 1. Introduction to CodeLess
  • 1.1. Before You Start
  • 1.2. CodeLess Objectives
  • 1.3. Highlighting Features
  • 1.4. Overview of the User Manual
  • 1.5. Where is it Applicable?
• 2. Getting Started
  • 2.1. How to Use CodeLess
  • 2.2. Hardware Setup
  • 2.3. Software Setup
  • 2.4. CodeLess Bluetooth Services
  • 2.5. SPI Set of Commands
  • 2.6. Event Management
  • 2.7. Bonding Database Management
  • 2.8. Event Handlers
  • 2.9. Flow Control and Sleep Modes
• 3. CodeLess Examples
  • 3.1. GPIO Pin References
  • 3.2. First Example
  • 3.3. Examples - Local Board
  • 3.4. Examples - Remote Board
• 4. Binary Mode
  • 4.1. Example of Switching between Command Mode and Binary Mode
  • 4.2. Binary Mode - Entering and Exiting Flow
• 5. CodeLess SDK Information
  • 5.1. Introduction
  • 5.2. CodeLess Development Environment
  • 5.3. DA145xx RAM Resources and CodeLess
  • 5.4. Configuring CodeLess Source Code
  • 5.5. Flash Memory Support, SUOTA, and SPI Commands
  • 5.6. Enabling/Disabling Specific AT Commands
• 6. Adding Custom Commands
  • 6.1. Overview of Implementation
  • 6.2. Implementation
  • 6.3. Execution
• 7. CodeLess Host Application
  • 7.1. Command Mode of CodeLess Host
  • 7.2. Binary Mode of CodeLess Host
  • 7.3. Binary Mode Using the Generic GATT Client Host
• 8. SmartConsole Android and iOS Application
  • 8.1. Overview
  • 8.2. Installation
  • 8.3. Device List
  • 8.4. Navigation Drawer Functionality
  • 8.5. Information and Disclaimer Screens
  • 8.6. Enter/Exit CodeLess Binary mode using Generic GATT Client
• 9. AT Commands
  • 9.1. AT
  • 9.2. ATI
  • 9.3. ATE
  • 9.4. ATZ
  • 9.5. ATF
  • 9.6. ATR
  • 9.7. AT+TMRSTART
  • 9.8. AT+TMRSTOP
  • 9.9. AT+CURSOR
  • 9.10. AT+RANDOM
  • 9.11. AT+BATT
  • 9.12. AT+BDADDR
  • 9.13. AT+SLEEP
  • 9.14. AT+HOSTSLP
  • 9.15. AT+IOCFG
  • 9.16. AT+IO
  • 9.17. AT+ADC
  • 9.18. AT+I2CSCAN
  • 9.19. AT+I2CCFG
  • 9.20. AT+I2CREAD
  • 9.21. AT+I2CWRITE
  • 9.22. AT+PRINT
  • 9.23. AT+MEM
  • 9.24. AT+PIN
  • 9.25. AT+CMDSTORE
  • 9.26. AT+CMDPLAY
  • 9.27. AT+CMD
  • 9.28. AT+ADVSTOP
  • 9.29. AT+ADVSTART
  • 9.30. AT+ADVDATA
  • 9.31. AT+ADVRESP
  • 9.32. AT+CENTRAL
  • 9.33. AT+PERIPHERAL
  • 9.34. AT+BROADCASTER
  • 9.35. AT+GAPSTATUS
  • 9.36. AT+GAPSCAN
  • 9.37. AT+GAPCONNECT
  • 9.38. AT+GAPDISCONNECT
  • 9.39. AT+BINREQ
  • 9.40. AT+BINREQACK
  • 9.41. AT+BINREQEXIT
  • 9.42. AT+BINREQEXITACK
  • 9.43. AT+BINRESUME
  • 9.44. AT+BINESC
  • 9.45. AT+CONPAR
  • 9.46. AT+DLEEN
  • 9.47. AT+MAXMTU
  • 9.48. AT+FLOWCONTROL
  • 9.49. AT+SPICFG
  • 9.50. AT+SPIWR
  • 9.51. AT+SPIRD
  • 9.52. AT+SPITR
  • 9.53. AT+BAUD
  • 9.54. AT+PWRLVL
  • 9.55. AT+PWM
  • 9.56. AT+EVENT
  • 9.57. AT+CLRBNDE
  • 9.58. AT+CHGBNDP
  • 9.59. AT+IEBNDE
  • 9.60. AT+HNDL
  • 9.61. AT+RSSI
  • 9.62. AT+SEC
  • 9.63. AT+HRTBT
• 10. AT commands parameters
  • 10.1. General-Purpose Input/Output Configuration
  • 10.2. CodeLess Error Codes
• 11. Appendix
  • 11.1. Codeless SW package content
  • 11.2. Codeless Host Application
• 12. FAQ
• 13. Revision History