Logo
  • 1. Abstract
  • 2. Prerequisites
  • 3. Introduction
  • 4. The DA14585/586 Hardware
  • 5. DA14585/586 Software Installation
  • 6. Software Development Tools
  • 7. Build a DA14585/586 Application
  • 8. Appendices
  • 9. Terms and Definitions
  • 10. Revision history
DA14531 and DA14585/586 Getting Started with the Pro Development Kit (UM-B-049)
  • DA14585/586 Getting Started with the Pro Development Kit

DA14585/586 Getting Started with the Pro Development Kit

UM-B-049

Contents

  • 1. Abstract
  • 2. Prerequisites
  • 3. Introduction
    • 3.1. Guide Purpose
    • 3.2. How long should it take?
    • 3.3. Unboxing the package content
  • 4. The DA14585/586 Hardware
    • 4.1. The ProDev Kit Motherboard
    • 4.2. The DA14585/586 Pro Kit daughterboard
    • 4.3. Configuring the Pro Kit Board by Jumper Settings
    • 4.4. Board Layout
    • 4.5. Connecting the ProDev Kit to the host PC
  • 5. DA14585/586 Software Installation
    • 5.1. Requirements of the Development PC
    • 5.2. Driver Installation
    • 5.3. Configuring the Serial Port for UART
    • 5.4. Troubleshooting
  • 6. Software Development Tools
    • 6.1. KEIL Installation
    • 6.2. e² Studio and SDK6
  • 7. Build a DA14585/586 Application
    • 7.1. The Blinky Peripheral Example Application
    • 7.2. The Barebone BLE Example Application
    • 7.3. Troubleshooting
    • 7.4. What Next ?
  • 8. Appendices
    • 8.1. Appendix A: Using the Pro Development Kit
    • 8.2. Appendix B: Latency Timer of the FTDI cable
    • 8.3. Appendix C: Battery Connection ‘Workaround’
    • 8.4. Appendix D: Power Bouncing Workaround
    • 8.5. Appendix D:SmartSnippets™ Studio
  • 9. Terms and Definitions
  • 10. Revision history
Next

© Copyright 2024, Renesas Electronics Corporation.